_Infrared Thermometer
Temperature range: -20~520℃ Resolution: 0.1℃ Repeatability: ±1℃or 1% Distance Ratio: 12:1 Accuracy: ±3% or 3℃ Emissivity: Fixed at 0.95 Response time: 500ms Power: 9 Volt battery x 1 _
_
_
Support for all BMW series (1997-2010) BMW Seat Occupancy Sensor Emulator
Support for all BMW series (1997-2010)
Support models:
1997-2003: E31, E36, E38, E39, E46, E53, etc.
2003-2007: E60, E63, E65,E87, E90, etc.
2007-2010: E60, E63, E64, E65, E70, E71, E81, E87, E90, E92, E93, etc.
Support for all BMW series (1997-2010) BMW Seat Occupancy Sensor Emulator
Support for all BMW series (1997-2010)
Support models:
1997-2003: E31, E36, E38, E39, E46, E53, etc.
2003-2007: E60, E63, E65,E87, E90, etc.
2007-2010: E60, E63, E64, E65, E70, E71, E81, E87, E90, E92, E93, etc.
_
_The
tester with bright light can be used as a digital brake fluid tester
suitable for determining if the brake fluid should be changed or not.
Exactly the product can be used for illumination.
Specifications:
<1>Green
LED: Battery is ok, and indicates the water in brake fluid is more than
0.2% and less than 1%, the brake fluid is ok; <2>Yellow LED:
indicates that the water in brake fluid is more than 1% and less than
3%, the brake fluid should be changed; <3>Red LED: indicates that the water in brake fluid is more than 3%, the fluid must be changed;
BATTERY TESTER
_1. Battery Test
2. Charging System Test
3. Start System Test
4. Max. Load Test
5. Monitor the status of the start system of the vehicle
6. Test the change of the voltage when start the vehicle
7. Can test battery standard: 100-1700CCA, 100-1000DIN, 100-1000IEC, 100-1700EN, JIS
2. Charging System Test
3. Start System Test
4. Max. Load Test
5. Monitor the status of the start system of the vehicle
6. Test the change of the voltage when start the vehicle
7. Can test battery standard: 100-1700CCA, 100-1000DIN, 100-1000IEC, 100-1700EN, JIS
_COP Ignition Quickly Tester
_ The Coil On Plug (COP) Quick Ignition tester is a battery-operated, hand-held quick tester and it is designed to easily and quickly determine if a COP is producing a proper spark for the plug.
The quick tester works by receiving a signal from the secondary ignition coil. Once the signal is received, the tester determines if the COP is producing the correct amount of voltage and the duration of the arc. If the voltage is correct, the tester beeps and the red LED light flashes; and if the duration of the arc is correct, the green LED will also flash
The quick tester works by receiving a signal from the secondary ignition coil. Once the signal is received, the tester determines if the COP is producing the correct amount of voltage and the duration of the arc. If the voltage is correct, the tester beeps and the red LED light flashes; and if the duration of the arc is correct, the green LED will also flash
_KV Ignition system quick tester
_
- The KV Ignition system quick tester is designed to work on distributor and DIS systems, and it can quick measure KV value of the secondary ignition and compare peak kV, or verify the proper firing of the secondary ignition system.
- Quick tester battery Operated and easy to use, simply place the probe over the ignition wire.